A laser scanner, also known as a laser galvanometer, is made up of an X-Y optical scanning head, electronic drive amplifiers, and optical reflector lenses. The signal provided by the computer controll...
The laser marking process is a widely used new technology that uses a laser beam with an appropriate energy density to scan the target surface, which results in a physical or chemical change in the ma...
Technicality of scanning galvanometerA basic laser scanning galvanometer device appears to be very simple: two reflective mirrors driven by an electric motor, capable of reflecting the emitted laser b...
During the scanning process, the divergent lens in the device is dynamically positioned precisely on the optical axis relative to the focusing lens through motor drive. This step changes the total foc...
Galvo motor does not self-lockFirstly, check whether there is any open circuit or short circuit in the connection wires, whether the connections are correct, whether the fuse is intact, and after conf...
The Fundamental Structure of Laser Galvo Scan HeadThe galvanometer scanner is composed of three parts: stator, rotor and detection sensor. Permanent magnets are used as the magnetic core for galvanome...
A laser scanner is an instrument that uses scanning technology to measure the size and shape of workpieces. A smart laser scanner must use a stable and accurate rotating motor. When the beam hits the ...
zh-CN
English 
日本語 
한국어 
français 
Deutsch 
Español 
italiano 
русский 
português 
العربية 
tiếng việt